Electrical services · Costa Blanca Sur
Energy usage analysis
Bill too high? We measure every circuit and show you where your power goes.
Suspect your electricity bill is too high?
Where does your electricity go?
Paying more for electricity than you think you use? Or wondering if someone is connected to your supply without you knowing? Not knowing is the worst part.
We measure every circuit of your fuse board for about 10 days. Then our electricians compare what each circuit uses with what its equipment should use, and you get a clear report: what we found, what it means and what to do next. You don't need to be an electrician to read it.
How it works.
About 10 days of measuring, then a report you can read.
Preparation
We need to know what each circuit feeds. You can tell us yourself, or we identify them for 15 € + VAT per circuit. Tell us too if something unusual is coming while we measure, like a party or building work.
Measuring
We fit our meters at your fuse board and they record every circuit, day and night. You just live as normal.
About 10 daysAnalysis and report
Our electricians go through the data hour by hour and write your report: a clear conclusion for every circuit, the full data set and practical next steps.
Time to save
With the report you know what to switch off, repair or change, so you can lower your bill where it can be lowered.
Hour by hour, not day by day.
A daily total hides almost everything. This is how we find what's really going on.
Every hour counts
We compare your main supply with all your circuits added up, hour by hour, across every full day we measure.
A machine repeats, a person doesn't
A pump or a heater on a timer uses the same energy at the same hour every day, to within a few watts. People don't live like that.
We check our own setup first
Before we write a word, we check every meter: on the right circuit and the right way round. A wrong reading would give you wrong conclusions.
What you get
- A meter on every circuit for about 10 days
- Every circuit compared with what its equipment should use
- A clear conclusion for every circuit
- The full data set
- Practical recommendations and next steps
What we need from you
- Wi-Fi that reaches the fuse board
- A free port on your router
- The fuse board open and reachable for the whole 10 days
- What each circuit feeds, or we identify them for you
When it makes sense.
- Your bill went up, but your habits didn't
- You think someone may be connected to your supply
- Something seems to use power while you're away
- You want to know what each circuit costs you
- You're thinking about solar panels or a battery and want your real usage first
What counts as a circuit?
Every circuit breaker in your fuse board is one circuit: the kitchen sockets, the lights, the pool pump. Count the small switches in a row, leaving out the main switch and the RCDs (the ones with a test button). Not sure? Send us a photo of your fuse board and we'll count them.
Do I have to do anything while you measure?
No. Live as you always do: that's exactly what we want to measure. Just tell us beforehand if something unusual is coming, like guests, a party or building work.
Why do you need Wi-Fi at the fuse board?
Our meters send their readings over your Wi-Fi the whole time, so the signal has to reach the fuse board. We also need a free port on your router, and the fuse board has to stay open and reachable until we collect the meters.
Can you tell if someone is using my electricity?
If energy goes where it shouldn't, the numbers don't add up, and the hours tell us more. A pump or a heater on a timer repeats at the same hour every day; a person doesn't. The report says what we found and what to do next.
What if my bill is high and nothing is wrong?
It happens. Often the cause is the contracted power, estimated readings or the tariff, not your installation. That's why we also check your latest bill for free when you book the analysis.
When do I pay?
Everything before we fit the meters: the analysis, the circuit identification if you want it, and the 50 € deposit. When we collect the meters, you get the deposit back as long as the equipment is undamaged.
Clear, fair pricing.
The price of the analysis depends on the number of circuits in your fuse board. Work out yours below.
Your price
How many circuits does your fuse board have?
Count the circuit breakers, the small switches in a row. Leave out the main switch and the RCDs (the ones with a test button).
Do you know what each circuit feeds?
Not sure? Send us a photo of your fuse board on WhatsApp and we'll count them.
Energy usage analysis
- Up to 12 circuits
- 295 € + VAT356.95 € VAT included
- Every 12 extra circuits
- + 122 € + VAT147.62 € VAT included
- We identify your circuits
- 15 € + VATper circuit, or you tell us yourself
- Equipment deposit
- 50 €returned when the meters come back undamaged
How you pay
- Before we fit the meters
The full price: the analysis, the circuit identification if you want it, and the 50 € deposit.
- When we collect them
You get your 50 € deposit back, as long as the equipment is undamaged. Then our electricians analyse the data and send you your report.
A free extra
Book the analysis and send us your latest electricity bill. We'll check if there's a better plan for your situation. No strings attached.
Book your energy analysis. Find out where your money goes.
+34 699 854 072Mon–Fri · 09:00–18:00
Other services.
Safety inspection
A top-to-bottom health check for your electrics, because 'probably fine' isn't good enough.
Maintenance plans
We look after your electrics all year and call you when the visit is due. Small faults fixed before they become big bills.
Emergency call-outs
Lights out? Sparks flying? One call and we're on our way.
Fuse board changes
Your fuse board is your home's bodyguard. Make sure it's a modern one with the latest safety-tech.
Re-wires
Old wires out, peace of mind in.
Fault-finding
We don't guess. We test, trace, and fix it at the source.
